Reidubo's real best-seller is a 120W, 8-port Gigabit PoE switch with 176 ratings and an Amazon's Choice badge — sold from the same listing in four port-count tiers up to a 900W, 48-port unit, so the power budget scales with the install instead of forcing a size decision blind. Real 4KV lightning protection, intelligent PD detection, and VLAN isolation carry across the switch lineup, alongside a genuinely separate outdoor-rated IP65 line, real 2.5G and 10G switches for higher-bandwidth setups, and single-port PoE injectors sold in 30/60/90W tiers. The one line this site leaves out is Reidubo's own security camera and NVR catalog — a real product line on the brand's storefront, but every single camera and NVR listing was out of stock at the time of writing, so nothing here links to something that can't actually be bought.
Real specs, not marketing gloss.
Every Reidubo PoE switch lists its total wattage and per-port maximum directly — 120W across 8 ports, 900W across 48 — a specific, checkable number rather than a vague "high power" claim.
Both the indoor and outdoor switch lines carry the same 4KV lightning protection rating, meant to keep the switch and whatever's plugged into it running through a power surge rather than just being an incidental side effect of a metal housing.
The flagship Gigabit PoE switch, the 100Mbps switch, and the outdoor switch are each genuinely sold in 2-4 port-count tiers from the same product listing — the power budget and price scale with the port count, not a single one-size-fits-all unit.
Reidubo's storefront also lists security cameras and NVRs — a real product line — but every one of those listings was out of stock when checked. This site only covers what's actually available to order right now.
Reidubo's real, currently in-stock networking catalog — organized the same way as the brand's own storefront.
The catalog's most-reviewed product and an Amazon's Choice pick, with 176 real ratings (4.4★, 72% 5-star). A built-in 120W power supply feeds 8 PoE+ ports (up to 30W each) plus 2 gigabit uplinks, with intelligent PD detection that only powers ports that actually need it, VLAN isolation for keeping cameras on their own segment, and 4KV lightning protection. It's genuinely sold in 4 real port-count tiers from this same listing — 10/18/26/50-port, scaling the PoE budget from 120W to 900W — so the size can match the install without hunting down a separate product page.
49 real ratings (4.3★, 62% 5-star) back this rack-mountable, fanless switch: 16 PoE ports at 100Mbps each (note — not gigabit per port) feed off a 300W built-in supply, with 2 separate gigabit uplinks for the connection back to a router or NVR. A 250-meter extend mode trades speed for reach on long camera runs, and VLAN isolation is available across the first 16 ports. Also sold as a 26-port/400W tier from the same listing.
29 real ratings (4.3★, 75% 5-star) on this purpose-built outdoor switch: an IP65-rated, industrial-grade ABS housing with 4KV lightning protection stands up to rain, dust and snow, while 8 gigabit PoE+ ports (up to 30W each, 120W total) run cameras or access points directly. It ships with wall- and pole-mounting hardware built in. Also sold as a smaller 4-port/75W tier from the same listing for lighter installs.
A 10-port design: 8 ports auto-negotiating up to 2.5Gbps with PoE (120W total budget), plus 2×10G SFP+ uplinks for a fast connection back to a router or NAS. Built for 2.5G NAS boxes, WiFi 6 access points and 4K PoE cameras that outgrow a plain gigabit switch.
The non-PoE counterpart to the 2.5G switch above — 8 ports of pure 2.5Gbps switching (60Gbps total capacity) for a NAS, gaming PC, 4K video workflow or access point that needs the bandwidth but already has its own power. Fanless, desktop or wall-mountable.
A genuine 10-gigabit switch: 6 RJ45 ports plus 2 SFP+ ports all capable of 10Gbps, auto-negotiating down to 2.5G or 1G as needed, with 160Gbps of total switching capacity and a quiet fan for sustained full-speed use — built for a 10Gb NAS, workstation, or router upgrade.
A smaller, fanless 10G option: 2 dedicated 10Gb RJ45 uplink ports plus 4×2.5G Base-T ports in a compact metal housing with VLAN support — a lighter-weight step into 10-gigabit networking than the full 8-port model above.
The one managed switch in the lineup: the same 10-port, 8-PoE+/120W hardware as the base Gigabit PoE Switch, but with real management features layered in — VLAN configuration and a PoE Scheduler that can turn port power on and off on a schedule, useful for rebooting stuck cameras automatically overnight.
The best-reviewed tier of the injector line: 33 real ratings (4.8★, 82% 5-star, zero ratings below 4 stars). It converts a non-PoE port into a powered one at up to 2.5Gbps, supporting the 802.3bt/at/af standards up to 328 feet of cable run. Also sold as 30W and 90W tiers from the same listing for lighter or heavier-power devices.
20 real ratings (4.1★). A 1-in/4-out PoE repeater rated IP65 for outdoor mounting, extending both power and data an additional 328 feet (100m) past a single PoE source — a way to reach cameras further out than one run would normally allow, without a second dedicated switch.
70 real ratings (4.6★, 80% 5-star), the best-reviewed of the smaller accessories. Splits a PoE line down to a 12V/2A barrel-jack output for powering a non-PoE camera, access point or IP phone — sold as a 2-pack. Real customers specifically mention using it to power an Ezviz C8C camera.
7 real ratings (4.0★). A complete kit pairing one PoE injector with 4 matching 12V/2A splitters, built to daisy-chain power to non-PoE devices across a combined distance of up to 1312 feet — useful for wiring up several non-PoE cameras or access points off one injector.
55 real ratings (4.6★, strong majority 5-star). A simple, non-PoE gigabit splitter that runs 4 devices off one Ethernet drop, powered over USB rather than a wall adapter — a compact option for a desk or entertainment center that only has one live network jack.
A 2-pack, weatherproof 5.8GHz wireless bridge rated for up to 3km point-to-point (or multipoint) range, with a 14dBi high-gain antenna and two 100Mbps LAN ports per unit — a way to extend a network across a yard, between buildings, or to a detached garage without trenching cable. 8 real ratings so far (3.7★) — the thinnest review history and lowest rating of any product on this site, worth knowing going in.
Converts an existing coax cable run into an Ethernet connection at up to 10/100Mbps, extending up to 3,938 feet (1200m) — built specifically for upgrading an old analog CCTV coax run to a modern IP camera system without pulling new cable. Still early — 3 real ratings (4.7★).
Real port counts, power budgets and features across every Reidubo switch, side by side.
| Switch | Reidubo Gigabit PoE Switch | Reidubo Fast Ethernet PoE Switch | Reidubo Outdoor Waterproof PoE Switch | Reidubo 2.5G PoE Switch | Reidubo 2.5G Switch (Non-PoE) | Reidubo 8-Port 10G Switch | Reidubo 6-Port 10G Switch | Reidubo Managed Gigabit PoE Switch | Reidubo 2.5Gb PoE Injector | Reidubo Outdoor PoE++ Gigabit Extender | Reidubo Gigabit PoE Splitter Adapter | Reidubo PoE Injector + Splitter Kit | Reidubo 4-Port Ethernet Splitter | Reidubo Wireless Bridge (5.8G CPE) | Reidubo Ethernet Over Coax (EoC) Converter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ports | 10-Port (8× PoE+ 10/100/1000Mbps) + 2 Gigabit Uplink | 18-Port (16× PoE+ 100Mbps) + 2 Gigabit Uplink | 8-Port Gigabit PoE+ (also sold as 4-Port) | 10-Port (8× 2.5G PoE + 2× 10G SFP+ uplink) | 8-Port 2.5Gbps (non-PoE) | 8-Port (6× 10G RJ45 + 2× 10G SFP+) | 6-Port (2× 10G RJ45 uplink + 4× 2.5G Base-T) | 10-Port (8× PoE+) + 2 Gigabit Uplink | 1× RJ45 in/out (single-device injector) | 5-Port (1 in, 4 out) | 1× RJ45 in, 5.5×2.1mm DC out (2-pack) | 1× injector + 4× splitter (5.5×2.1mm) | 5× RJ45 (1 in, 4 out) | 2× 100Mbps LAN per unit (2-pack) | 1× Coax in, 1× RJ45 out |
| Power Budget | 120W total, up to 30W/port | 300W total, up to 30W/port | 120W total, up to 30W/port | 120W total PoE budget | External adapter (no PoE output) | External adapter (non-PoE) | External adapter (non-PoE) | 120W total, up to 30W/port | 60W output | PoE++ passthrough, gigabit | 12V/2A output | 12V/2A per splitter | USB-powered (no PoE) | PoE adapter included | External adapter |
| Protection | 4KV lightning protection | Fanless, rack-mountable metal housing | IP65 waterproof, dustproof, snowproof; 4KV lightning protection | Rack-mountable | Fanless design | Quiet fan cooling | Fanless metal housing | Sturdy metal housing, fanless | IEEE 802.3bt/at/af compliant | IP65 waterproof | IEEE 802.3af/at compliant | IEEE 802.3af/at compliant | Supports Cat5/5e/6/7/8 | IP65 waterproof | — |
| Key Features | Intelligent PD detection, QoS, VLAN mode, unmanaged plug-and-play | 250m extend mode, VLAN isolation (ports 1-16), unmanaged plug-and-play | Built-in power supply, wall/pole mounting hardware included | Auto-negotiates 100/1000/2500Mbps, SFP+ modules sold separately | 60Gbps switching capacity, desktop or wall mount | 160Gbps switching capacity, 10G/2.5G/1G auto-negotiation | VLAN support, 10G/5G/2.5G/1G compatible | VLAN configuration, PoE Scheduler, managed (not plug-and-play) | Up to 2.5Gbps, up to 328 ft (100m) cable run | Extends 328 ft (100m) additional reach | Input voltage 48-52V | Combined reach up to 1312 ft (400m) | Simultaneous 4-device networking | 3km range, 14dBi antenna, point-to-point/multipoint | Up to 3,938 ft (1200m) over existing coax |
| Other Sizes | Also sold as 18-Port (250W), 26-Port (400W), 50-Port (900W) | Also sold as 26-Port (400W) | Also sold as 4-Port (75W) | — | — | — | — | — | Also sold as 30W and 90W tiers | — | 2-Pack | — | — | — | — |
| Rating | 4.4★ (176) | 4.3★ (49) | 4.3★ (29) | 4.2★ (111) | 4.2★ (111) | 4.2★ (111) | 4.2★ (111) | 4.2★ (111) | 4.8★ (33) | 4.1★ (20) | 4.6★ (70) | 4★ (7) | 4.6★ (55) | 3.7★ (8) | 4.7★ (3) |
Amazon's own AI-generated "Customers say" summaries, built from the real text of customer reviews — shown here because individual review text is currently gated behind Amazon sign-in and we won't fabricate quotes to fill that gap.
Real customers most often praise how easy it is to set up and its build quality for the price. Reliability is the one aspect with genuinely mixed feedback — most units hold up, but some reviewers reported a unit failing after around four months, and a few noted the real-world power draw fell short of the rated 120W.
With a smaller review base, feedback is straightforwardly positive — reviewers describe it as working well right out of the box with no configuration needed.
Too few reviews yet for Amazon to generate an aspect breakdown, but the rating itself is solid — three in four reviewers gave it 5 stars.
Too few reviews for an aspect breakdown, but the rating is the strongest of any Reidubo product on this site — every rating so far is 4 or 5 stars.
Reviewers describe it as a cost-effective, reliable way to power a non-PoE device off an existing Ethernet run, with one specifically confirming it worked for their Ezviz C8C camera.