A real network wiring layout — one core switch, its branches, and how the outdoor and long-distance pieces connect back to it. Every numbered box links to the real product it represents.
Everything starts at one core switch, plugged into the router. The 8-port, 120W Gigabit PoE Switch is the natural default — but if the install needs more ports than raw per-port speed (a bank of budget cameras, say), the Fast Ethernet PoE Switch's 16-port/300W tier covers more devices per dollar at 100Mbps instead of gigabit per port.
See this product on the homepage →When one part of the network needs to stay isolated from another — guest WiFi kept off the camera VLAN, for instance — the Managed Gigabit PoE Switch adds that segmentation on top of the same 8-port/120W hardware as the base switch, plus a PoE Scheduler that can power-cycle a stuck camera automatically overnight.
See this product on the homepage →A gigabit link becomes the bottleneck the moment a NAS, a 4K camera recording station, or a multi-user file server joins the network. Branching a 2.5G or 10G switch off the core switch gives that one device (or a small cluster of them) real bandwidth headroom without upgrading every port in the building.
See this product on the homepage →Not every camera on a network is new. A PoE Injector sits between the switch and one older, non-PoE device, adding power over the same Ethernet run at 30W, 60W or 90W depending on what that device needs — without touching the rest of the switch's PoE budget.
See this product on the homepage →Some access points and small devices don't accept PoE directly — they want a plain barrel-jack DC input. A PoE Splitter takes the power off an existing PoE line and hands it over as 12V/2A DC, so that device can still run off the same cable run as everything else.
See this product on the homepage →Standard Ethernet tops out around 100 meters before signal quality drops. Placed partway down a long run to an outbuilding, the outdoor-rated PoE Extender repeats both power and data, adding up to 328 feet (100m) of extra reach — the difference between a camera that works and one that doesn't, on a longer property.
See this product on the homepage →Once the cable actually reaches a detached garage, shed or outbuilding, the IP65-rated Outdoor Waterproof PoE Switch becomes its own local hub there — its own 8-port (or 4-port) PoE budget, its own 4KV lightning protection, built to survive being mounted outside rather than adapted from an indoor unit.
See this product on the homepage →Sometimes running a cable isn't possible — across a driveway, to a second building with no trench. A pair of 5.8GHz Wireless Bridges, one on each end, links the two networks over the air at up to 3km with a 14dBi antenna — no digging required, at the cost of the weaker review history this specific product carries.
See this product on the homepage →A property with existing analog CCTV coax cabling doesn't need that cable pulled out. An Ethernet-over-Coax Converter turns that same coax run into a working Ethernet connection — up to 3,938 feet (1200m) — letting an old analog camera location get upgraded to a modern IP camera without any new cable in the wall.
See this product on the homepage →